Thanks for writing.
Make sure detailed timings is ON. Then you'll see the times for each
page component.
There's strong built-in sync, but if you want to be sure you might
want to use a SyncOnText (eValid: Validate > & Synchronize > Text String)
after which command you put an ElapsedTime command.
* Here is how to use the eValid internal timer facility to measure
how long one or a set of commands takes, as described here:
http://www.e-Valid.com/Products/Documen ... tml#timing* These commands are available from the eValid GUI as described here:
http://www.e-Valid.com/Products/Documen ... html#timerHope this helps...